Photographic scales for evaluating seam smoothness according to AATCC Test Method (TM) 88B. Includes single-and double-needle scales. Replace every 3 years.

Filling stripe fabrics with a repeat of 2in (5cm) or 4in (10cm) in cut pieces, which can be heat-sealed or over-locked edges for tests involving agitation.

AATCC filling stripe fabrics presented in various sizes which can be cold cut for static tests or with heat sealed or over-locked edges for agitation tests.

The spray tester nozzle is a replacement part for the Spray Test Apparatus used in AATCC Test Method 22, Water Repellency: Spray Test

The AATCC Shrinkage ruler allows you to quickly and easily mark and measure dimensional change specimens using 18-, 10-, or 8-inch benchmarks.

Use Three-Dimensional Smoothness Appearance Replicas to evaluate specimens tested according to AATCC TM124. Set of 6 plastic replicas. Replace every 3 years.

The spray rating chart is a scale used for the evaluation of specimens tested according to AATCC Test Method 22, Water Repellency: Spray Test.

AATCC stain release replicas are used to evaluate fabrics tested according to Test Method TM 130 Soil Release. Oily Release Method.

Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency. Pack of 100 10x10 sheets.

Blotting paper is an absorbent nonwoven material used in several AATCC test methods for water resistance or repellency. Pack of 100 6x6 sheets.

This fabric has been faded to the specified endpoint for a 5 AFU test. Match to exposed blue wool to determine when a 5 AFU test is complete.

A copy of the AATCC technical manual in written or CD form.

Wrinkle recovery replicas are used to evaluate specimens tested according to AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method.

The Wrinkle Tester is used to induce uniform wrinkling according to AATCC Test Method 128, Wrinkle Recovery of Fabrics: Appearance Method.

The J.A. King KFG-2403B-Calibration BST, the Black Standard Temperature, sensor is for use with the Solarbox calibration multimeter, item #KFG-2403.

2 x 2" overlocked filling stripe fabrics have a repeat of 2� (5cm) or 4� (10cm) and are presented in cuts of various sizes that are cold cut or heat sealed.

AATCC Standard reference detergent without optical brightener, 24 lb tub

A set of rubber balls, 10 millimeters in diameter, to perform wash tests. This package from Summit Measurement includes two hundred (200) rubber balls.

This product is a 1,200 milliliter washing and specimen container from J.A. King. For use with Colorfastness to Washing and Dry Cleaning Testers.

This 140mm diameter sample cutter is for use with the Martindale Abrasion and Pilling Tester a device to determine the wear and pilling resistance of textiles.

A 1500 Watt replacement lamp for a solarbox tester. All Solarbox testers are also available as 3000 with 200 x 420mm exposure area and 2500 watt lamp.

This product is a 2500 watt arc replacement lamp designed for use with JA King Solarbox 3000 models.

A 38mm diameter sample cutter for use with the Martindale Abrasion and Pilling Tester a device to determine the wear and pilling resistance of textiles.

The Martindale Abrasion and Pilling Tester is recognized as the standard method of determining the wear and pilling resistance of textiles or leather.

The Automatic Flammability Tester 45 degrees measures the burning rate of apparel fabrics and certain upholstery materials. One specimen holder included.

A 45 degree fixed angle table for use with the KFG- 2150 Quality Light Box with a choice of 4 lights. Control panel includes hour meter, and warm-up facilities.

This product is a 550 milliliter washing and specimen container from J.A. King. For use with KFG-2050 Colorfastness to Washing and Dry Cleaning Testers.

This six position Martindale Abrasion and Pilling Tester is the standard method of determining the wear and pilling resistance of textiles or leather.

These 6mm diameter Stainless Steel Balls for AATCC/ISO Wash Tests are for use with Color fastness to Washing and Dry Cleaning Testers, product #KFG-2050.

This eight position Martindale Abrasion and Pilling Tester is the standard method of determining the wear and pilling resistance of textiles or leather.

These AATCC 5lb weights for stain release are textile testing consumables for use with the Eco Dyer Laboratory Dyeing Machine from J.A. King

These AATCC blue wool L-2's are textile testing consumables for use with the Eco Dyer Laboratory Dyeing Machine from J.A. King

These AATCC chlorine test control fabrics are textile testing consumables for use with the Eco Dyer Laboratory Dyeing Machine from J.A. King.

These AATCC chromatic transfer scales are textile testing consumables for use with the Eco Dyer Laboratory Dyeing Machine from J.A. King

AATCC Cotton / polyester ballast 36 X 36", 12 pieces 4 lb load

These AATCC ballast pieces are made of 100% Cotton and measure 36� x 36�. This is a pack of 12 pieces, usable for a load of approximately 4lbs.

AATCC Crease Appearance Replicas are used to evaluate fabrics that have been tested according to AATCC Test Method 88C Retention of creases in Fabrics.

The Microscopy Cross Sections Kit contains the equipment for fiber and yarn cross-sections as presented in AATCC Test Method 20 Fiber Analysis: Qualitative.

The Gray Scale for Color Change is used to visually evaluate change in color due to colorfastness tests as described in Evaluation Procedure 1.

AATCC filling stripe fabrics presented in various sizes which can be cold cut for static tests or with heat sealed or over-locked edges for agitation tests.